GBJ20005 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 20A GLASS PASSIVATED BRIDGE RECTIFIER

GBJ20005 THRU GBJ2010
GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE RANGE
Features
· Glass Passivated Die Construction
· High Case Dielectric Strength of 1500VRMS
· Low Reverse Leakage Current
· Surge Overload Rating to 240A Peak
· Ideal for Printed Circuit Board Applications
· Plastic Material - UL Flammability
Classification 94V-0
Mechanical Data
· Case: Molded Plastic
· Terminals: Plated Leads, Solderable per
MIL-STD-202, Method 208
· Polarity: Molded on Body
· Mounting: Through Hole for #6 Screw
· Mounting Torque: 5.0 in-lbs Maximum
· Weight: 6.6 grams (approx)
· Marking: Type Number
50 to 1000 Volts
CURRENT
20.0 Ampere
GBJ
.799(20.3)
.776(19.6)
.094(2.40)
.079(2.02)
.043(1.10)
.035(0.9)
1.193(30.3)
1.169(29.7)
HOLE FOR
NO. 6 SCREW
.173(4.40)
.134(3.40)
.708(18.0)
.669(17.0)
.441(11.2)
.425(10.8)
.189(4.80)
.173(4.40)
.114(2.90)
.098(2.50)
.031(.80)
.024(.60)
.402(10.2) .303(7.7) .303(7.7)
.386(9.80) .287(7.3) .287(7.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
GBJ
20005
GBJ
2001
GBJ
2002
GBJ
2004
GBJ
2006
GBJ
2008
Maximum Reverse Peak Repetitive Voltage
V_RRM
50 100 200 400 600 800
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600 800
Maximum Average Forward TC=100℃(Note 1)
Rectified Output Current At TA=25℃(Note 2)
I_(AV)
20
4.6
Peak Forward Surge Current single sine wave
superimposed on rated load (JEDEC Method)
I_FSM
260
Rating for Fusing (t＜8.3ms)
I²t
260
Maximum thermal resistance per leg (Note 2)
(Note 1)
Operating Junction and Storage Temperature Range
Maximum Forward Voltage Drop Per Bridge
Element At 7.5A
R_JA
R_JC
T_J,T_STG
V_FM
24
1.2
(-55 to +150)
1.05
Maximum DC Reverse Current at TA=25℃
rated DC blocking voltage per Leg TA=125℃
I_R
10
250
Notes: 1. Unit mounted on 300mm×300mm×1.6mm A1. Plate heatsink
2. Unit mounted on P.C.B. without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum
Heat transfer with #6 screw
GBJ
2010
1000
700
100
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
℃/W
℃
Volts
μA