F2TVS5.0A Datasheet, PDF (1/3 Pages) Nanjing International Group Co – Surface Mount Transient Voltage Suppressors Peak Pulse Power 200W Stand off Voltage 5.0 to 190V

Features
F2TVS5.0A thru F2TVS190A
Surface Mount Transient Voltage Suppressors
Peak Pulse Power 200W Stand off Voltage 5.0 to 190V
• Glass passivated junction
• Excellent clamping capability and Fast response time
• 200W peak pulse power capability with a 10/1000us waveform
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Low profile typical thickness 1.0mm
• Unidirectional configurations
eSGA
Typical Applications
Use in sensitive electronics protection against voltage transients induced by inductive load switching and
lighting on Ics,MOSFET,signal lines of sensor units for consumer,computer,industrial and telecommunication
Maximum Ratings and Thermal Characteristics
(TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Peak power dissipation with a 10/1000us
waveform
Peak pulse current with a 10/1000us
waveform
Steady state power dissipation on infinite
heatsink
Peak forward surge current,8.3ms single
half sine-wave
Maximum instantaneous forward voltage
at 25A
Thermal resistance junction to ambient
air
Operating junction and storage
temperature range
P_PPM
I_PPM
P_M(AV)
I_FSM
V_F
Rthja
TJ, TSTG
Value
Minimum 200
See Next Table
1
30.0
3.5
90
-65 to +175
UNIT
W
A
W
A
V
/W
1
www.dgnjdz.com