1N5400 Datasheet, PDF (1/2 Pages) Motorola, Inc – STANDARD RECOVERY RECTIFIERS 50-1000 VOLTS 3.0 AMPERE

1N5400 THRU 1N5408
3.0 AMP SILICON RECTIFIERS
FEATURES
* Low forward voltage drop
* High current capability
* High reliability
* High surge current capability
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
3.0 Amperes
DO-27
.220(5.6)
.197(5.0)
DIA.
0.945(24.0)
MIN.
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 1.10 grams
* Both normal and Pb free product are available:
* Normal:80~95%Sn,5~20%Pb
* Pb free:99 Sn above can meet Rohs enviroment substance
directive request
.375(9.5)
.285(7.2)
.052(1.3)
.043(1.1)
DIA.
0.945(24.0)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at Ta=75 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
Ta=25 C
at Rated DC Blocking Voltage
Ta=100 C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance RθJA (Note 2)
Operating and Storage Temperature Range TJ, TSTG
1N5400 1N5401
50 100
35
70
50 100
1N5402 1N5404
200 400
140 280
200 400
1N5406 1N5407 1N5408
600 800 1000
420 560 700
600 800 1000
UNITS
V
V
V
3.0
A
200
A
1.0
V
5.0
µA
50
µA
40
pF
30
C/W
-65 +150
C
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance from Junction to Ambient .375" (9.5mm) lead length.
122