PMC-12V050W1AA Datasheet, PDF (7/11 Pages) Delta Electronics, Inc. – Panel Mount Power Supply 12V 50W 1 Phase

TECHNICAL DATASHEET
PMC Panel Mount Power Supply
12V 50W 1 Phase / PMC-12V050W1AA
De-rating VS AC input voltage
■ No output power de-rating across the entire
input voltage range
Assembly & Installation
Mounting
Ⓐ Mounting holes for power supply assembly onto the mounting surface. Power supply shall be mounted on minimum 2 mounting
holes using M3 screw minimum 5 mm length.
Ⓑ This surface belongs to customer’s end system or panel where the power supply is mounted.
Ⓒ Connector.
Installation
Fig. 2 Mounting Orientation
 Only use M3 screw ≤ 6 mm through the base mounting holes. This is to
keep a safe distance between the screw and internal components.
 Recommended mounting tightening torque : 4~8Kgf.cm
7
All parameters are specified at 25°C ambient unless otherwise noted.
www.DeltaPSU.com (March 2013, Rev. 00)