PJ-12V15WXNA Datasheet, PDF (6/11 Pages) Delta Electronics, Inc. – PJ Open Frame Power Supply

TECHNICAL DATASHEET
PJ Open Frame Power Supply
12V 15W 1 Phase / PJ-12V15W□NA
L x W x D: 107.5 x 60 x 32 mm (Enclosed)
Item Device Description
1 Input Connector
2 Output Connector
3 VR
4 Cover
5 Chassis
Assembly & Installation
Assembly Reference
■ Open Frame
Notes
– Dimensions are in mm
– For information on I/O Connector and Housing, please refer to Table 1 (Page 6).
– For Enclosed type: There are 6 threaded mounting holes and 2 normal mounting
holes.
– Recommended mounting torque for tightening: 4~8Kgf.cm.
■ L Frame / Enclosed
For safety reasons, please ensure the mounted device is kept at ≥ 4mm safety distance at all sides from other components and
equipments. Please insert an insulation sheet between the system and product, if the safety distance is less than 4mm.
Use flexible cable (stranded or solid) of AWG No. 22-18. Please refer to Table 1 for the recommended Housing and Terminal.
Table 1
Input (JST)
Output (JST)
Connector (Board Mounting)
B3P5-VH(LF)(SN)
B2P-VH(LF)(SN)
Housing
VHR-5N
VHR-2N
Terminal
SVH-21T-P1.1
6
All parameters are specified at 25°C ambient unless otherwise indicated.
www.DeltaPSU.com (November 2014, Rev. 01)