H48SA53010NNFA Datasheet, PDF (5/13 Pages) Delta Electronics, Inc. – Delphi Series H48SA53010, Half Brick Family DC/DC Power Modules: 48V in, 54V/10.2A out

ELECTRICAL CHARACTERISTICS CURVES
Figure 9: Input Terminal Ripple Current, ic, at nominal input
voltage and rated load current with 12µH source impedance
and 150µF electrolytic capacitor (200 mA/div).
Figure 10: Input reflected ripple current, is, through a 12µH source
inductor at nominal input voltage and rated load current
(50 mA/div).
Figure 11: Output voltage noise and ripple measurement
test setup.
Figure 12: Output voltage ripple at nominal input voltage and
rated load current (20 mV/div). Load capacitance: 100µF ceramic
capacitor and 220µF electrolytic capacitor. Bandwidth: 20 MHz.
Scope measurement should be made using a BNC cable (length
shorter than 20 inches). Position the load between 51 mm to 76
mm (2 inches to 3 inches) from the module.
DS_H48SA53010_08042011
5