FL75L10A Datasheet, PDF (4/7 Pages) Delta Electronics, Inc. – Delphi Series Filter Module 75Vdc max input, 10A max output current

APPLICATION
Note: C2 through C5 can be 0.01 F to o.1 F. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended
value indicated in the power module data sheet.
Figure 7: Recommended schematic when used as the input filter to a high-frequency dc-to-dc converter
Note: Vdc input(+) and Vdc input(-) planes should overlay each other, as should the Vi(+) and Vi(-) planes, as should the Vout(+) and Vout(-) planes. Avoid
routing signals or planes under the power module or the filter module. Ensure all connections are low impedance.
Figure 8: Recommended layout when used as the input filter to a high-frequency dc-to-dc converter
4