AA07S0300A Datasheet, PDF (3/5 Pages) Delta Electronics, Inc. – 7W Single Output AC/DC converter

Power Derating Curve
Notes
1 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless
otherwise noted.
2 Ripple & Noise measurement bandwidth is 0~20 MHz
3 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not
damage the power supplies however they may not meet all listed specifications.
4 All AC/DC modules should be externally fused at the front end for protection.
5 Other input and output voltage may be available, please contact for custom solution
6 Specifications subject to change without notice
Mechancial Drawing
Mechanical Dimensions
10.16
[0.40]
4
3
6.0 [0.24]
19.5 [0.77]
0.7 [0.03]
Pin Connections
Pin
Function
1
AC(N) – AC Neutral
2
AC(L) – AC Line
3
+Vout
4
-Vout
Bottom View
2
1
20.32 [0.80]
25.4 [1.00]
Physical Outlines
Case Size
: 50.8x25.4x19.5mm (2.00x1.00x0.77 Inches)
Case Material
: Plastic resin + Fiberglass (flammability to UL 94V-0 rated)
Weight
: 44g
DS_AA07S_04082014
►All dimensions in mm (inches)
►Tolerance: ±0.5 (±0.02)
►Pin diameter ⇔ 1.0 ±0.1 (0.04±0.004)
E-mail: [e-mail]
http://www.deltaww.com/dcdc P3