PMT-12V100W1AX Datasheet, PDF (2/11 Pages) Delta Electronics, Inc. – PMT Panel Mount Power Supply

TECHNICAL DATASHEET
PMT Panel Mount Power Supply
12V 100W 1 Phase / PMT-12V100W1A□
Specifications
Input Ratings / Characteristics
Nominal Input Voltage
Input Voltage Range
Nominal Input Frequency
Input Frequency Range
Input Current
Efficiency at 100% Load
Max Inrush Current (Cold Start)
Leakage Current
100-120Vac, 200-240Vac (Selectable by Switch)
90-132Vac, 180-264Vac (Selectable by Switch)
50-60Hz
47-63Hz
< 2.00A @ 115Vac, < 1.20A @ 230Vac
> 86.0% @ 115Vac & 230Vac
< 36A @ 230Vac
< 0.5mA @ 240Vac
Output Ratings / Characteristics*
Nominal Output Voltage
Factory Set Point Tolerance
Output Voltage Adjustment Range
Output Current
Output Power
Line Regulation
Load Regulation
PARD** (20MHz)
Rise Time
Start-up Time
Hold-up Time
Dynamic Response (Overshoot & Undershoot O/P Voltage)
Start-up with Capacitive Loads
12Vdc
12Vdc ± 1%
11.4-13.2Vdc
8.50A
102W
± 0.5% typ. (@ 100-132Vac & 200-264Vac)
± 0.5% typ. (@ 100-132Vac & 200-264Vac )
< 150mVpp
< 20ms @ nominal input (100% load)
< 500ms @ nominal input (100% load)
> 25ms @ 115Vac, > 30ms @ 230Vac
± 5% @ 0-100% load
8,000µF Max
*For power de-rating from 50°C to 70°C, see power de-rating on page 3.
**PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1µF ceramic capacitor & 47µF electrolytic capacitor.
2
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (December 2016, Rev. 01)