PJT-65W Datasheet, PDF (2/9 Pages) Delta Electronics, Inc. – PJT Open Frame Power Supply

TECHNICAL DATASHEET
PJT Open Frame Power Supply
PJT-65W Series / PJT-□□V65WBA□
Specifications
Model Number PJT-12V65WBA☐ PJT-15V65WBA☐ PJT-18V65WBA☐ PJT-24V65WBA☐
Input Ratings / Characteristics
Nominal Input Voltage
Input Voltage Range
Nominal Input Frequency
Input Frequency Range
Input Current
Efficiency at 100% Load
Max Power Dissipation
Max Inrush Current (Cold Start)
Leakage Current
115Vac
230Vac
100-240Vac
90-264Vac
50-60Hz
47-63Hz
< 1.50A typ. @ 115Vac
86.0% typ.
87.0% typ.
87.0% typ.
86.5% typ.
88.5% typ.
88.0% typ.
0.3W (0% load)
30A typ. @ 115Vac, 60A typ. @ 230Vac
0.1mA @ 240Vac
Output Ratings / Characteristics
Nominal Output Voltage
Factory Set Point Tolerance
Output Current
Output Power
Line Regulation
Load Regulation
PARD* (20MHz)
Start-up Time
Hold-up Time
Dynamic Response
(Overshoot & Undershoot O/P Voltage)
Start-up with Capacitive Loads
115Vac
230Vac
115Vac
230Vac
12Vdc
15Vdc
No potentiometer (± 5%)
5.00A
4.20A
60W
63W
± 0.5% @ 115Vac & 230Vac
± 1.0% @ 115Vac & 230Vac
< 120mVpp
< 150mVpp
3000ms typ. (100% load)
1500ms typ. (100% load)
16ms typ. (100% load)
80ms typ. (100% load)
± 5% @ 50-100% load
(Slew Rate: 0.1A/µS)
4,000uF Max 3,500uF Max
18Vdc
3.61A
65W
< 180mVpp
3,000uF Max
*PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1μF ceramic capacitor & 47μF electrolytic capacitor.
87.0% typ.
24Vdc
2.71A
65W
< 240mVpp
2,000uF Max
Mechanical
Dimensions
Unit Weight
Cooling System
Terminal
Wire
PJT-☐☐V65WBAA
101.6 x 50.8 x 30 mm [2” x 4”]
0.13 kg (0.29 lb)
Convection
Input: JST B2P3-VH (LF)(SN)
Output: JST B4P-VH (LF)(SN)
PJT-☐☐V65WBAB Input: Molex 26-62-4030
Output: Molex 26-60-4040
PJT-☐☐V65WBAC Input: JWT A3963WV2-3P-D
Output: JWT A3963WV2-4P
AWG 22-18
2
All parameters are specified at 25°C ambient unless otherwise indicated.
www.DeltaPSU.com (April 2016, Rev. 01)