DCS Datasheet, PDF (18/20 Pages) Delta Electronics, Inc. – Voltage and resistor-based trim

LEAD (Sn/Pb) PROCESS RECOMMEND TEMP. PROFILE
Note: The temperature refers to the pin of DCS, measured on the pin Vout joint.
LEAD FREE (SAC) PROCESS RECOMMEND TEMP. PROFILE
Temp.
Peak Temp. 240 ~ 245 ℃
220℃
200℃
Ramp down
max. 4℃ /sec.
150℃
25℃
Preheat time
90~120 sec.
Ramp up
max. 3℃ /sec.
Time Limited 75 sec.
above 220℃
Time
Note: The temperature refers to the pin of DCS, measured on the pin Vout joint.
DS_DCS12S0A0S06NFA_11142013
18