|
DRP024V480W1BX Datasheet, PDF (12/15 Pages) Delta Electronics, Inc. – CliQ II DIN Rail Power Supply | |||
|
◁ |
TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 480W 1 Phase / DRP024V480W1Bâ¡
Power Boost
Power Boost is the reserve power available
constantly that allows reliable startup to
support sudden and short spike of loads
with high inrush current typically during turn
on to remove the need of more expensive
higher rated power supply unit. After the
output has reached its steady state set
value, the power supply can support surge
loads with a higher short-term power
demand up to 200% of maximum rated load
(IO Max), for a maximum duration of 2
seconds, or 150% of maximum rated load
for a maximum duration of 5 seconds. The
Power Boost is also available to repeatedly
basis with according to the condition of an
average (R.M.S) output power shall not
exceed continuous operating condition or
refer to duty cycle calculation below.
í µí°·í µí±¢í µí±¡í µí±¦ í µí±í µí±¦í µí±í µí±í µí± (%) =
í µí±í µí±
í µí±í µí±í µí±¡í µí±í µí± í µí±í µí±í µí±í µí±
í µí°´í µí±£í µí±í µí±í µí±í µí±í µí± í µí±í µí±¢í µí±¡í µí±í µí±¢í µí±¡ í µí±í µí±í µí±¤í µí±í µí± (í µí±í µí°´í µí±£í µí±)
(í µí±í µí±í µí±¤í µí±í µí± í µí°µí µí±í µí±í µí± í µí±¡
=
Ã í µí±í µí±) + (í µí±í µí±í µí±-í µí±í µí±í µí±í µí± í µí±í µí±í µí±¤í µí±í µí± Ã í µí±í µí±)
í µí±í µí±í µí±¡í µí±í µí± í µí±í µí±í µí±í µí±
OR
í µí±í µí±í µí±-í µí±í µí±í µí±í µí± í µí±í µí±í µí±¤í µí±í µí± =
ï¿½í µí±í µí°´í µí±£í µí±
Ã í µí±í µí±í µí±¡í µí±í µí± í µí±í µí±í µí±í µí±ï¿½ â (í µí±í µí±í µí±¤í µí±í µí± í µí°µí µí±í µí±í µí± í µí±¡
í µí±í µí±
Ã í µí±í µí±)
ï® An example of Power Boost and Average Output Power
Power Boost
200%
150%
150%
120%
120%
Peak Power
(WP)
960
720
720
576
576
Power Boost
Duration (TP)
2 sec
5 sec
5 sec
10 sec
10 sec
Duty Cycle
5%
10%
35%
20%
35%
Non-Peak
Power (WN)
455W
453W
351W
456W
428W
Non-Peak Power
Duration (TN)
38 sec
45 sec
9.3 sec
40 sec
18.5 sec
Total Time
(T)
40 sec
50 sec
14.3 sec
50 sec
28.5 sec
It is not recommended to prolong the duration of Power Boost to be longer than the specified duty cycle calculation, this may cause
damage to the PSU.
12
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (July 2015, Rev. 04)
|
▷ |