PMT-5V350W1AX Datasheet, PDF (10/12 Pages) Delta Electronics, Inc. – PMT Panel Mount Power Supply

TECHNICAL DATASHEET
PMT Panel Mount Power Supply
5V 300W 1 Phase / PMT-5V350W1A□
Safety Instructions
• Must select correct AC input voltage before turning on (Refer to the “Device Description” on Page 5).
• If user’s mounting orientation is not according to the recommended mounting orientations, please consult Delta for further
information.
• The device is not recommended to be placed on low thermal conductive surface. For example, plastics.
• The enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not
touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!
• Do not touch the terminals while power is being supplied. Risk of electric shock.
• Prevent any foreign metal, particles or conductors from entering the device through the openings during installation.
It may cause electric shock, safety hazard, fire and/or product failure.
• Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device,
remove L and N connections before removing the Earth connection. The power supply must be mounted by metal screws onto a
grounded metal surface. It is highly recommended that the Earth terminal on the connector be connected to the grounded metal
surface.
Accessories
LM-01: Top Fixing Bracket
This bracket is used to fix the power supply onto a flat
surface from the top.
•
•
10
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (December 2016, Rev. 04)