Language : 

V48SR1R225NRFA Datasheet, PDF (1/14 Pages) Delta Electronics, Inc. – Delphi Series V48SR, 1/16th Brick 66W DC/DC Power Modules: 48V in, 1.2V, 25A out
Delphi Series V48SR, 1/16th Brick 66W
DC/DC Power Modules: 48V in, 1.2V, 25A out
The Delphi Series V48SR, 1/16th Brick, 48V input, single output, isolated
DC/DC converter, is the latest offering from a world leader in power
systems technology and manufacturing ― Delta Electronics, Inc. This
product family provides up to 66 watts of power or 25A of output current
(1.8V and below) in an industry standard 1/16th brick form factor (1.30” x
0.90”). The 1.2V output offers one of the highest output currents available
and provides up to 84.0% efficiency at full load. With creative design
technology and optimization of component placement, these converters
possess outstanding electrical and thermal performance, as well as
extremely high reliability under highly stressful operating conditions. All
modules are protected from abnormal input/output voltage, current, and
temperature conditions. For lower power needs with the 1.2V output, but
in a similar small form factor, please check out Delta S48SP (36W or
1.2V/10A) and S48SE (17W or 1.2V/5A) series standard DC/DC
High efficiency: 84.0% @ 1.2V/25A
Size: 33.0 x 22.9 x 9.5 mm
Industry standard footprint and pinout
Fixed frequency operation
SMD and through-hole versions
Input UVLO and OVP
OTP and output OCP, OVP
Output voltage trim: -20%, +10%
Monotonic startup into normal and
pre-biased loads
2250V isolation and basic insulation
No minimum load required
No negative current during power or enable
ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS18001 certified manufacturing
UL/cUL 60950 (US & Canada), TUV
(EN60950) and CE mark pending
SMD pins
Positive remote On/Off
OTP and output OVP, OCP mode
(auto-restart or latch)
Optical Transport
Data Networking