V48SH3R325NNFA Datasheet, PDF (1/13 Pages) Delta Electronics, Inc. – Industry standard footprint and pinout

Delphi Series V48SH, 1/16^th Brick 100W
DC/DC Power Modules: 48V in, 3.3V, 25A out
The Delphi Series V48SH, 1/16^th Brick, 48V input, single output, isolated
DC/DC converter, is the latest offering from a world leader in power
systems technology and manufacturing ― Delta Electronics, Inc. This
product family provides up to 100 watts of power or 40A of output current
(1.8V and below) in an industry standard 1/16^th brick form factor (1.30” x
0.90”). The 3.3V output offers one of the highest output currents available
and provides up to 91.0% efficiency at full load. With creative design
technology and optimization of component placement, these converters
possess outstanding electrical and thermal performance, as well as
extremely high reliability under highly stressful operating conditions. All
modules are protected from abnormal input/output voltage, current, and
temperature conditions. For lower power needs, but in a similar small
form factor, please check out Delta V36SE (50W), S48SP (36W or 10A)
and S36SE (17W or 5A) series standard DC/DC modules.
FEATURES
 High efficiency: 91.0% @ 3.3V/25A
 Size: 33.0x22.8x9.5mm
(1.30”x0.90”x0.37”)
 Industry standard footprint and pinout
 Fixed frequency operation
 SMD and through-hole versions
 Input UVLO
 OTP and output OCP, OVP
 Output voltage trim: -20%, +10%
 Monotonic startup into normal and
pre-biased loads
 1500V isolation and basic insulation
 No minimum load required
 No negative current during power or
enable on/off
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS18001 certified manufacturing
facility
 UL/CUL 60950-1 (US & Canada) -
Recognized
OPTIONS
 SMD pins
 Short pin lengths available
 Positive remote On/Off
 Heat spreader
APPLICATIONS
 Optical Transport
 Data Networking
 Communications
 Servers
DATASHEET
DS_V48SH3R325_10282013