Language : 

V48SH1R235NNFA Datasheet, PDF (1/14 Pages) Delta Electronics, Inc. – 33.0x22.8x9.5mm (1.30”x0.90”x0.37”) ( W/O heat-spreader ) 33.0x22.8x12.7mm (1.30”x0.90”x0.50”) ( With heat-spreader )
Delphi Series V48SH, 1/16th Brick 42W
DC/DC Power Modules: 48V in, 1.2V, 35A out
The Delphi Series V48SH, 1/16th Brick, 48V input, single output,
isolated DC/DC converter, is the latest offering from a world leader in
power systems technology and manufacturing ― Delta Electronics,
Inc. This product family provides up to 100 watts of power or 50A of
output current in an industry standard 1/16th brick form factor (1.30” x
0.90”). The 1.2V output offers one of the highest output currents
available and provides up to 87% efficiency at full load. With creative
design technology and optimization of component placement, these
converters possess outstanding electrical and thermal performance, as
well as extremely high reliability under highly stressful operating
conditions. All modules are protected from abnormal input/output
voltage, current, and temperature conditions. For lower power needs,
but in a similar small form factor, please check out Delta, V36SE (50W
or 15A), S48SP (36W or 10A) and S36SE (17W or 5A) series standard
DC/DC modules.
 High efficiency: 87% @ 1.2V/35A
 Size:
33.0x22.8x9.5mm (1.30”x0.90”x0.37”)
( W/O heat-spreader )
33.0x22.8x12.7mm (1.30”x0.90”x0.50”)
( With heat-spreader )
 Industry standard footprint and pinout
 Fixed frequency operation
 SMD and through-hole versions
 Input UVLO
 OTP and output OCP, OVP
 Output voltage trim: -20%, +10%
 Monotonic startup into normal and
pre-biased loads
 1500V isolation and basic insulation
 No minimum load required
 No negative current during power or enable
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS18001 certified manufacturing
 UL/cUL 60950-1 (US & Canada)
 SMD pins
 Short pin lengths available
 Positive remote On/Off
 Heat spreader
 Optical Transport
 Data Networking
 Communications
 Servers