V48SH1R050NNFA Datasheet, PDF (1/16 Pages) Delta Electronics, Inc. – Industry standard footprint and pinout

Delphi Series V48SH, 1/16^th Brick 50W
DC/DC Power Modules: 48V in, 1.0V, 50Aout
The Delphi Series V48SH, 1/16^th Brick, 48V input, single output,
isolated DC/DC converter, is the latest offering from a world leader in
power systems technology and manufacturing ― Delta Electronics,
Inc. This product family provides up to 100 watts of power in an
industry standard 1/16^th brick form factor (1.30” x 0.90”). The 1.0V
output offers one of the highest output currents available and provides
up to 84% efficiency at full load. With creative design technology and
optimization of component placement, these converters possess
outstanding electrical and thermal performance, as well as extremely
high reliability under highly stressful operating conditions.For lower
power needs, but in a similar small form factor, please check out Delta,
V36SE (50W or 15A), S48SP (36W or 10A) and S36SE (17W or 5A)
series standard DC/DC modules.
FEATURES
 High efficiency: 84% @ 1.0V/50A
 Size:
33.0x22.8x9.5mm (1.30”x0.90”x0.37”)
( W/O heat-spreader )
33.0x22.8x12.7mm (1.30”x0.90”x0.50”)
( With heat-spreader )
 Industry standard footprint and pinout
 Fixed frequency operation
 SMD and through-hole versions
 Input UVLO
 OTP and output OCP, OVP
 Output voltage trim: -20%, +10%
 Monotonic startup into normal and
pre-biased loads
 1500V isolation and basic insulation
 No minimum load required
 No negative current during power or
enable on/off
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS18001 certified manufacturing
facility
 UL/cUL 60950-1 (US & Canada)
OPTIONS
 SMD pins
 Short pin lengths available
 Positive/Negative remote On/Off
 Open Frame/Heat spreader
APPLICATIONS
 Optical Transport
 Data Networking
 Communications
 Servers
DS_V48SH1R050_10282013