Language : 

V48SC Datasheet, PDF (1/17 Pages) Delta Electronics, Inc. – Fixed frequency operation
Delphi Series V48SC, 1/16th Brick 90W
DC/DC Power Modules: 48V in, 12V, 7.5A out
The Delphi Series V48SC, 1/16th Brick, 48V input, single output,
isolated DC/DC converters, are the latest offering from a world leader
in power systems technology and manufacturing ― Delta Electronics,
Inc. This product family provides up to 90 watts of power or 30A of
output current in the 1/16th brick form factor (1.3”x0.90”) and pinout.
With creative design technology and optimization of component
placement, these converters possess outstanding electrical and
thermal performance, as well as extremely high reliability under highly
stressful operating conditions. Typical efficiency of the 12V/7.5A
module is greater than 92.0%. All modules are protected from
abnormal input/output voltage, current, and temperature conditions.
For lower power needs, but in a similar small form factor, please check
out Delta V36SE (50W), S48SP (36W or 10A) and S36SE (17W or 5A)
series standard DC/DC modules.
 High efficiency: 92.0% @ 12V/7.5A
 Size:
Without heat spreader:
33.0x22.8x9.5mm (1.30”x0.90”x0.37”)
With heat spreader
33.0x22.8x12.7mm (1.30”x0.90”x0.50”)
 Industry standard footprint and pinout
 Fixed frequency operation
 SMD or through-hole versions
 Input UVLO
 OTP and output OCP, OVP
 Output voltage trim: -20%, +10%
 Monotonic startup into normal and
pre-biased loads
 1500V isolation and basic insulation
 No minimum load required
 No negative current during power or
enable on/off
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS18001 certified manufacturing
 UL/cUL 60950-1 (US & Canada)
 SMD pins
 Short pin lengths available
 Positive remote On/Off
 Heat spreader
 Optical Transport
 Data Networking
 Communications
 Servers