THMR1395 Datasheet, PDF (1/1 Pages) Delta Electronics, Inc. – Through Hole Power Inductors

Through Hole Power Inductors
THMR1395 Type
Features
High current ( lsat up to 66A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Mechanical Dimension:
A
RECOMMENDED PAD PATTERNS
D
C
1.6/0.063
B
9.0/0.354
E
7.5/0.295
Electrical Characteristics: At 25^oC: 100KHz, 1.0V
PART NO.
THMR1395-R28
THMR1395-R35
THMR1395-R45
THMR1395-0R6
THMR1395-0R8
THMR1395-1R2
L¹
(uH)
0.28
0.35
0.45
0.60
0.80
1.20
DCR
(m ) 8%
0.47
0.47
0.96
0.96
1.25
1.55
Isat ²
(Adc)
66
58
47
40
37
30
UNIT : mm/inch
A = 12.50 / 0.492 Max.
B = 14.50 / 0.571 Max.
C = 3.20 0.5 / 0.126 0.020
D = 9.50 / 0.374
E = 1.30 0.1/0.051 0.004
Irms ³
(Adc)
47
47
35
35
30
27
1.Tolerance of inductance : 0.28~1.20uH 15%
2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current
3.Irms is the DC current which cause the surface temperature of the part increase less than 45^oC
4.Operating temperature: -40^oC to 125^oC ( including self-temperature rise )
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) _{252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.}
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
153