NC40 Datasheet, PDF (1/14 Pages) Delta Electronics, Inc. – No minimum load required

Delphi NC40 Series Non-Isolated Point of Load
DC/DC Power Modules: 12Vin, 0.9V-5Vout, 40A
The Delphi NC40 Series, 12V input, single output, non-isolated point of
load DC/DC converters are the latest offering from a world leader in
power systems technology and manufacturing ― Delta Electronics,
Inc. The NC40 series operates from a 12V nominal input, provides up
to 40A of power in a vertical or horizontal mounted through-hole
package and the output can be resistor- or voltage-trimmed from
0.9Vdc to 5.0Vdc. NC40 series has built-in current sharing control and
multiple NC30/NC40 series modules could be paralleled together to
provide even higher output currents. NC40 series provides a very cost
effective point of load solution. With creative design technology and
optimization of component placement, these converters possess
outstanding electrical and thermal performance, as well as extremely
high reliability under highly stressful operating conditions.
DATASHEET
DS_NC12S40A_05282008
FEATURES
 High efficiency:
92% @ 12Vin, 5V/40A out
 Voltage and resistor-based trim
 No minimum load required
 Output voltage programmable from
0.9Vdc to 5.0Vdc via external resistors
 Fixed frequency operation
 Input UVLO, output OVP, OTP, OCP, SCP
 Remote ON/OFF (default: positive)
 Power good output signal
 Output voltage sense
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing
facility
 UL/cUL 60950 (US & Canada) Recognized,
and TUV (EN60950) Certified
 CE mark meets 73/23/EEC and 93/68/EEC
directives
OPTIONS
 Vertical or horizontal versions
 Negative On/Off logic
APPLICATIONS
 DataCom
 Distributed power architectures
 Servers and workstations
 LAN / WAN applications
 Data processing applications