MDS-300APB24-AA Datasheet, PDF (1/12 Pages) Delta Electronics, Inc. – Medical AC-DC Open Frame Power Supply

Medical AC-DC Open Frame Power Supply
24V 300W with 5V/0.5A Standby / MDS-300APB24 AA
MDS-300APB24 AA
Highlights & Features
– Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1
– Compliant with IEC 60601-1-2 4th Ed. Requirements
– Up to 240 Watt Convection in 3" x 5" x 1.4" Package
– Up to 800 K Hrs MTBF
– Suited for Type BF Medical Products
– 2 × MOPP isolation
Safety Standards
CB Certified for worldwide use
Model Number:
MDS-300APB24 AA
Unit Weight:
405g
Dimensions (W x L x H):
76.2x127x35.6mm 3x5x1.4 inch
General Description
Delta’s new MDS-300APB24 AA open frame design offers a high energy density (14.3 Watts/in³) 3x5 inch design for Type BF patient
access medical products. With operating parameters of 90 to 264 Vac universal input voltage, temperatures of -10 to +70 degrees
centigrade, and altitudes of up to 5000 meters (16,400 feet), the design is well suited for a variety of both medical and non-medical
applications. Other features include input surge of 300 Vac, low leakage current, no-load input power < 0.5 Watt, and 800K hour MTBF.
This product is certified for EMC standards EN 55011 for industrial, scientific and medical (ISM) radio-frequency equipment, and EN
55022 for Industrial Technology Equipment (ITE) radio-frequency equipment. In addition, only recognized Japanese capacitors are
used to ensure long product life.
An enhanced feature set, includes a 5 Volt/0.5 amp standby output, remote on/off, remote sense, and a power good signal that are
included as part of the standard product.
The design, which has protection against shock compliant with 2XMOPP and Type BF requirements, has both medical (with risk report
available), and ITE safety approvals, including cURus(US&Canada) /TUV/GB(China); plus, CB certificates with all national deviations.
Full compliance with RoHS Directive 2011/65/EU for environmental protection is included. The unit comes in a standard 3x5 inch
footprint, with height suitable for 1U applications. Robust terminals are capable of multiple connections of the main output to the end
product.
Model Information (All with 5V/0.5A standby available):
Model Number
MDS-300APB24 AA
Input Voltage Output Voltage Convection Current Output Forced Air Current Output
90-264Vac 24Vdc
0-10A
0-12.5A (with 10 CFM forced air)
MDS
Delta Medical
power Supply
300
Max wattage in the
product Series.
300 → 300W
A
Family Code
A～ Z
P
Product Type
P: Open Frame
B
Input Type Code
B: 3pin Class I
24
Output Voltage
24 for 24V
AA
Revision code
1
All parameters are specified at 25°C ambient unless otherwise noted.
www.DeltaPSU.com (November 2016, Rev.09)