LCP-200A4HSR Datasheet, PDF (1/9 Pages) Delta Electronics, Inc. – RoHS Compliant Small Form Factor Pluggable Transceiver RoHS Compliant for ESCON, Fast Ethernet, ATM, SONET OC-3/SDH STM-1

RoHS Compliant Small Form Factor Pluggable Transceiver RoHS
Compliant for ESCON, Fast Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
Compliant with SFP Transceiver MSA
specification
Compliant with Industry Standard RFT
Electrical Connector and Cage
1310nm LED Source Technology
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
The LCP-200A4HSR is a hot pluggable 3.3V
Small-Form-Factor transceiver module designed
expressly for high-speed communication
applications that require rates of up to
200Mbit/sec. It is compliant with the SFP
Multi-source Agreement.
The LCP-200A4HSR transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage.
The transmitter section consists of a 1310nm
LED in an optical subassembly (OSA) while the
receiver consists of InGaAs PIN photodiode
mounted together with a trans-impedance
preamplifier. The post-amplifier also includes a
LOS (Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical
signal level is detected.
Applications
ESCON
SONET OC-3/SDH STM-1
ATM Network
Fast Ethernet
Switch to Switch interface
Switched backplane applications
File server interface
Data Link up to 2km in 62.5/125um Multi Mode
Fiber
The LCP-200A4HSR transceiver is a Class 1
eye safety product. The optical power levels,
under normal operation, are at eye safe level.
1
DELTA ELECTRONICS, INC.
Aug., 2006
Rev. 0A
www.deltaww.com