English
Language : 

H48SA53010 Datasheet, PDF (1/13 Pages) Delta Electronics, Inc. – Industry standard pin out
Delphi Series H48SA53010, Half Brick Family
DC/DC Power Modules: 48V in, 54V/10.2A out
The Delphi Series H48SA53010 Half Brick, 38~60V input, 54V single
output, isolated, open frame DC/DC converter is the latest offering from
a world leader in power systems technology and manufacturing -- Delta
Electronics, Inc. This product family provides up to 550 watts of power
in an industry standard footprint. With creative design technology and
optimization of component placement, these converters possess
outstanding electrical and thermal performance, as well as extremely
high reliability under highly stressful operating conditions. The Delphi
Series converters meet all safety requirements with basic insulation.
Typical efficiency of the 54V, 550W module is better than 94% and all
modules are fully protected from abnormal input/output voltage, current
and temperature conditions.
DATASHEET
DS_H48SA53010_10212014
FEATURES
 High efficiency: 94.2% @ 54V/ 10.2A
 Standard footprint:
58.4x61.0x11.2mm (2.30”x2.40”x0.44”)
(without heat spreader)
58.4x61.0x12.7mm (2.30”x2.40”x0.50”)
(with heat spreader)
 Industry standard pin out
 Monotonic startup into normal and pre-bias
loads
 Fixed frequency operation
 Input UVLO, output OVP, OCP, OTP
 No minimum load required
 Output trim range : -5%,+5%
 2250V isolation
 Basic insulation
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing facility
 UL/cUL 60950-1 (US & Canada)
Recognized, and TUV (EN60950-1) Certified
OPTIONS
 Positive remote on/off
 Heat spreader available for
extended operation
APPLICATIONS
 Telecom / DataCom
 Wireless Networks
 Server and Data Storage
 Industrial/Test Equipment
 Power over Ethernet (PoE)