|
DNM04S0A0S10PFD Datasheet, PDF (1/17 Pages) Delta Electronics, Inc. – Non-Isolated Point of Load DC/DC Power Modules: 2.8-5.5Vin, 0.75-3.3V/10Aout | |||
|
Delphi DNM, Non-Isolated Point of Load
DC/DC Power Modules: 2.8-5.5Vin, 0.75-3.3V/10Aout
The Delphi Series DNM, 2.8-5.5V input, single output, non-isolated
Point of Load DC/DC converters are the latest offering from a world
leader in power system and technology and manufacturing â Delta
Electronics, Inc. The DNM04 series provides a programmable output
voltage from 0.75V to 3.3V using an external resistor. The DNM series
has flexible and programmable tracking and sequencing features to
enable a variety of startup voltages as well as sequencing and tracking
between power modules. This product family is available in surface
mount or SIP packages and provides up to 10A of output current in an
industry standard footprint. With creative design technology and
optimization of component placement, these converters possess
outstanding electrical and thermal performance, as well as extremely
high reliability under highly stressful operating conditions.
FEATURES
 High efficiency: 96%@5.0Vin, 3.3V/10A out
 Small size and low profile: (SMD)
33.0x 13.5x8.8mm (1.30â x 0.53â x 0.35â)
 Surface mount packaging
 Standard footprint
 Voltage and resistor-based trim
 Pre-bias startup
 Output voltage tracking
 No minimum load required
 Output voltage programmable from
0.75Vdc to 3.3Vdc via external resistor
 Fixed frequency operation
 Input UVLO, output OTP, OCP
 Remote ON/OFF
 Remote sense
 ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing facility
 UL/cUL 60950-1 (US & Canada) Recognized,
and TUV (EN60950-1) Certified
 CE mark meets 73/23/EEC and 93/68/EEC
directives
OPTIONS
 Negative On/Off logic
 Tracking feature
 SIP package
APPLICATIONS
 Telecom / DataCom
 Distributed power architectures
 Servers and workstations
 LAN / WAN applications
 Data processing applications
DATASHEET
DS_DNM04SMD10_03062009
|
▷ |