DNM Datasheet, PDF (1/15 Pages) Delta Electronics, Inc. – Voltage and resistor-based trim

Delphi DNM series Non-Isolated Point of Load
DC/DC Power Modules: 8.3-14Vin, 0.75-5.0V/10A out
The Delphi series DNM, 8.3~14V input, single output, non-isolated point
of load DC/DC converters are the latest offering from a world leader in
power systems technology and manufacturing ― Delta Electronics, Inc.
The DNM series provides a programmable output voltage from 0.75V to
5.0V through an external trimming resistor. The DNM converters have
flexible and programmable tracking and sequencing features to enable
a variety of sequencing and tracking between several point of load
power modules. This product family is available in a surface mount or
SIP package and provides 10A of output current in an industry standard
footprint and pinout. With creative design technology and optimization
of component placement, these converters possess outstanding
electrical and thermal performance and extremely high reliability under
highly stressful operating conditions.
DATASHEET
DS_DNM10SMD10_07182012
FEATURES
 High efficiency: 93% @ 12Vin, 3.3V/10A out
 Small size and low profile: (SMD)
33.0x 13.5x8.8mm (1.30” x 0.53” x 0.35”)
 Standard footprint
 Voltage and resistor-based trim
 Pre-bias startup
 Output voltage tracking
 No minimum load required
 Output voltage programmable from
0.75Vdc to 5Vdc via external resistor
 Fixed frequency operation (300KHz)
 Input UVLO, output OTP, OCP
 Remote ON/OFF
 Remote sense
 ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing facility
 UL/cUL 60950-1 (US & Canada) recognized,
and TUV (EN60950-1) certified
 CE mark meets 73/23/EEC and 93/68/EEC
directive
OPTIONS
 Negative On/Off logic
 Tracking feature
 SMD package
APPLICATIONS
 Telecom / DataCom
 Distributed power architectures
 Servers and workstations
 LAN / WAN applications
 Data processing applications