DNL10S0A0S20NFD Datasheet, PDF (1/16 Pages) Delta Electronics, Inc. – Non-Isolated Point of Load DC/DC Power Modules: 8.3-14Vin, 0.75-5.0V/20A out

Delphi DNL10, Non-Isolated Point of Load
DC/DC Power Modules: 8.3-14Vin, 0.75-5.0V/20A out
The Delphi series DNL10, 8.3~14V input, single output, 20A non-isolated
point of load DC/DC converter in surface mounted package is the latest
offering from a world leader in power systems technology and
manufacturing ― Delta Electronics, Inc. The DNL10 series provides a
programmable output voltage from 0.75V to 5.0V through an external
trimming resistor. The DNL10 converters have flexible and programmable
tracking and sequencing features to enable a variety of sequencing and
tracking between several point of load power modules. This product
family is available in a surface mount or SIP package and provides up to
20A of output current in an industry standard footprint and pinout. With
creative design technology and optimization of component placement,
these converters possess outstanding electrical and thermal performance
and extremely high reliability under highly stressful operating conditions.
FEATURES
Š High efficiency: 92% @ 12Vin, 3.3V/20A out
Š Small size and low profile: (SMD)
33.0x 13.5x 8.8mm (1.30” x 0.53” x 0.35”)
Š Standard footprint
Š Voltage and resistor-based trim
Š Pre-bias startup
Š Output voltage tracking
Š No minimum load required
Š Output voltage programmable from
0.75Vdc to 5.0Vdc via external resistor
Š Fixed frequency operation (300KHz)
Š Input UVLO, output OTP, OCP
Š Remote ON/OFF
Š Remote sense
Š ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing
facility
Š UL/cUL 60950-1 (US & Canada), and TUV
(EN60950-1) - pending
OPTIONS
APPLICATIONS
Š Telecom / DataCom
Š Distributed power architectures
Š Servers and workstations
Š LAN / WAN applications
Š Data processing applications
PRELIMINARY DATASHEET
DS_DNL10SMD20_07182012