DCM04S0A0S12PFA Datasheet, PDF (1/16 Pages) Delta Electronics, Inc. – Non-Isolated Point of Load DC/DC Power Modules: 2.4-5.5Vin, 0.6-3.3V/12Aout

DCM04S0A0S12PFA
FEATURES
 High efficiency: 95% @ 5.0Vin, 3.3V/12A out
 Small size and low profile:
20.3x 11.4x 8.5mm (0.8”x 0.45”x 0.33”)
 Surface mount packaging
 Standard footprint
 Voltage and resistor-based trim
 Pre-bias startup
 Output voltage tracking
 No minimum load required
 Output voltage programmable from
0.6Vdc to 3.3Vdc via external resistor
 Fixed frequency operation
 Input UVLO, output OCP
 Remote on/off
 ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing facility
 UL/cUL 60950-1 (US & Canada)
Delphi DCM, Non-Isolated Point of Load
DC/DC Power Modules: 2.4-5.5Vin,
0.6-3.3V/12Aout
The Delphi Series DCM, 2.4-5.5V input, single output,
non-isolated Point of Load DC/DC converters are the latest
offering from a world leader in power systems technology
and manufacturing -- Delta Electronics, Inc. The DCM
series provides a programmable output voltage from 0.6V to
3.3V using an external resistor and has flexible and
programmable tracking features to enable a variety of
startup voltages as well as tracking between power
modules. This product family is available in surface mount
and provides up to 12A of output current in an industry
standard footprint. With creative design technology and
optimization of component placement, these converters
possess outstanding electrical and thermal performance, as
well as extremely high reliability under highly stressful
operating conditions.
OPTIONS
 Negative on/off logic
 Tracking feature
APPLICATIONS
 Telecom / DataCom
 Distributed power architectures
 Servers and workstations
 LAN / WAN applications
 Data processing applications

DS_ DCM04S0A0S12PFA _10022013
E-mail: [e-mail]
http://www.deltaww.com/dcdc
P1