D12S300-1 Datasheet, PDF (1/13 Pages) Delta Electronics, Inc. – 4.5V~13.8Vin, 0.6V~5.0Vout, 60A

FEATURES
Š High Efficiency:
94% @ 12Vin, 5.0V/60A out
Š Wide input range: 4.5V~13.8V
Š Output voltage programmable from
0.6Vdc to 5.0Vdc via external resistors
Š No minimum load required
Š Fixed frequency operation
Š Input UVLO, output OCP, OVP.
Š Remote On/Off (Positive logic)
Š Power Good Function
Š RoHs completed
Š ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing
facility
Delphi D12S300-1 Non-Isolated Point of Load
DC/DC Modules: 4.5V~13.8Vin, 0.6V~5.0Vout, 60A
The D12S300-1 series, 4.5~13.8V input, single output, non-isolated
point of load DC/DC converters are the latest offering from a world
leader in power systems technology and manufacturing -- Delta
Electronics, Inc. The D12S300-1 series product provides up to 60A and
the output can be resistor trimmed from 0.6Vdc to 5.0Vdc. It provides a
very cost effective point of load solution. With creative design
technology and optimization of component placement, these converters
possess outstanding electrical and thermal performance, as well as
extremely high reliability under highly stressful operating conditions.
The D12S300-1 series is a voltage mode controlled Buck topology. The
output can be trimmed in the range of 0.6Vdc to 5.0Vdc by an external
resistor from Trim pin to Ground. The converter can be turned ON/OFF
by remote control with positive on/off (ENABLE pin) logic. The
converter DC output is disabled when the signal is driven low. When
this pin is floating the module will turn on. The converter can protect
itself by entering hiccup mode against over current and short circuit
condition. Also, the converter will shut down when an over voltage
protection is detected.
DATASHEET
DS_D12S300-1_12282009
OPTIONS
APPLICATIONS
Š Telecom/DataCom
Š Distributed power architectures
Š Servers and workstations
Š LAN/WAN applications
Š Data processing applications