08KENG3EAM-R Datasheet, PDF (1/1 Pages) Delta Electronics, Inc. – HIGH PERFORMANCE IEC INLET SNAP-IN FILTERS

KEN HIGH PERFORMANCE
SERIES IEC INLET SNAP-IN FILTERS
D^VE
INTRODUCTIONS
1. Applications for UL 544 & UL 2601 health care equipment.
2. Specially designed with ground choke providing most effective
EMI suppression for high frequency noise (ranged 5MHz-25MHz).
3. Bleeder resistor can be added with suffix "-R" on part numbers.
4. With optional 0.1uF X capacitor instead of 0.047uF.
5. With optional solder lug connection instead of fast on terminal.
COMPONENTS
PART NO.
L (mH) Cx (uF) Lg (uH)
03KENG3DAM/03KENW3DAM 3.1 0.047
03KENG3EAM/03KENW3EAM 3.1
0.1
* ^{08KENG3DAM/08KENW3DAM 0.8}
* ^{08KENG3EDAM/08KENW3EAM 0.8}
0.047 ₁₀₀
0.1
**10KENG3DAM/10KENW3DAM 0.4 0.047
**10KENG3EAM/10KENW3EAM 0.4
0.1
** UL, CSA & VDE approved to 9A 115/250VAC
* VDE approved to 6A 250V
MINIMUM INSERTION LOSS IN dB
COMMON MODE (L-G) IN 50 OHM SYSTEM
CURRENT
RATING
FREQUENCY-MHz
.15 .50 1.0 5.0 10 30
3A
20 30 30 30 25 10
8A
10 12 15 15 15 10
10A
5 10 12 12 12 10
DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM
3A
0 10 12 25 25 20
8A
0 10 12 25 25 20
10A
0 10 12 25 25 20
MECHANICAL CONSTRUCTION
G3DAM
SPECIFICATIONS
1. Maximum leakage current each
line-to-ground @ 115VAC 60Hz: 2uA
@ 250VAC 50Hz: 5u A
2. Hipot rating (one minute)
line-to-ground: 2250VDC
line-to-line: 1450VDC
3. Operating frequency: 50/60Hz
4. Rated voltage: 115/250VAC
ELECTRICAL SCHEMATIC
L
L _{R Cx}
I
N
L
E
N
G
Lg
R: 1M /-R ONLY
L'
L
O
A
D
N'
G'
1
2
5
1.22 0.02
31.5 0.5
3 G4
1.12 MAX.
28.4 MAX.
1
2
5
1.22 0.02
31.5 0.5
+0.012
1.12 -0
+0.3
28.45 -0
R0.08MAX.
R2.0MAX.
0.04~0.063
1.0~1.6
SUGGESTED MOUNTING CUTOUT
SUGGESTED THICKNESS OF
MOUNTING PANEL IS FROM
0.04 (1.0) TO 0.063 (1.6)
INCH (MM) OF MOUNTING CUTOUT
W3DAM
7-5
+0.012
1.12 -0
+0.3
28.45 -0
R0.08 MAX.
R2.0 MAX.
0.04~0.063
1.0~1.6
SUGGESTED MOUNTING CUTOUT
1.12 MAX.
28.4 MAX.
ALL WIRE LEADS 4.0" LONG MIN.
UNIT:
INCH
mm