08KEEG3EA Datasheet, PDF (1/1 Pages) Delta Electronics, Inc. – HIGH PERFORMANCE IEC CONNECTOR FILTERS

HIGH PERFORMANCE IEC
SERIES CONNECTOR FILTERS
V
D E _OR
INTRODUCTIONS
SPECIFICATIONS
1. Specially designed with ground choke providing most effective
EMI suppression for high frequency noise (ranged 5MHz-25MHz).
1. Maximum leakage current each
2. Bleeder resistor can be added with suffix "-R" on part numbers.
line-to-ground @ 115VAC 60Hz: 0.20mA
3. With optional Y capacitor 100pF to 3300pF.
@ 250VAC 50Hz: 0.40mA
4. All part numbers are UL recognized, CSA certified and VDE approved. ^{2. Hipot rating (one minute)}
line-to-ground: 2250VDC
COMPONENTS
line-to-line: 1450VDC
3. Operating frequency: 50/60Hz
PART NO.
L (mH) Cx (uF) Cy (pF) Lg (uH)
4. Rated voltage: 115/250VAC
03KEEG3EA/03KEEW3EA 3.1
*^{08KEEG3EA/08KEEW3EA 0.8}
**^{10KEEG3EA/10KEEW3EA 0.4}
03KEEG3SA/03KEEW3SA 3.1
06KEEG3SA/06KEEW3SA 0.8
0.1 2200 100
0.13 (2X)
3.3 (2X)
2.051
52.1
1.575 0.020
40.0 0.5
L
N
G
10KEEG3SA/10KEEW3SA 0.4
* ^{VDE approved to 6A 250V.}
** ^{UL, CSA & VDE approved to 9A 115/250VAC.}
1.575 0.005
40.0 0.13
+0.02
1.12-0
+0.5
28.45-0
M3(2X)
MINIMUM INSERTION LOSS IN dB
COMMON MODE (L-G) IN 50 OHM SYSTEM
PART NO.
FREQUENCY-MHz
.15 .50 1.0 5.0 10 30
03KEEG3EA/03KEEW3EA 15 20 25 40 40 45
08KEEG3EA/08KEEW3EA 10 15 20 35 40 50
10KEEG3EA/10KEEW3EA
7
12 18 30 30 50
03KEEG3SA/03KEEW3SA 15 20 25 40 40 40
06KEEG3SA/06KEEW3SA
7
15 20 35 40 40
10KEEG3SA/10KEEW3SA
4
12 18 30 30 45
DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM
03KEEG3EA/03KEEW3EA
5
12 15 40 50 45
08KEEG3EA/08KEEW3EA
5
10 15 45 40 50
10KEEG3EA/10KEEW3EA
4
12 18 30 30 50
03KEEG3SA/03KEEW3SA 10 20 35 40 45 40
06KEEG3SA/06KEEW3SA 10 25 40 35 40 40
10KEEG3SA/10KEEW3SA 10 25 35 30 30 45
ELECTRICAL SCHEMATIC
L
L
I ^{R Cx}
L
N
E
N
L'
Cy
L
O
A
Cy
D
N'
G
G'
Lg
R: 1M /-R ONLY
MECHANICAL CONSTRUCTION
1.118 MAX.
28.4 MAX.
0.13(2X)
3.3(2X)
1.99MAX.
50.5MAX.
1.575 0.02
40.0 0.5
L
N
G
1.18 0.02
30.0 0.5
R0.118(4X)
R3.0(4X)
SUGGESTED MOUNTING CUTOUT
(MOUNTING FROM FRONT)
G3SA
1.575 0.005
40.0 0.13
1.12MAX.
28.4MAX.
0.13(2X)
3.3(2X)
1.99MAX.
50.5MAX.
1.575 0.02
40.01 0.5
L
N
G
M3
+0.02
1.12-0
+0.5
28.45-0
+0
R3.0-3.0
+0
R0.12-0.12
SUGGESTED MOUNTING CUTOUT
WIRE LENGTH : 4.0" MIN.
W3EA
1.18 0.02
30.0 0.5
1.575 0.005
40.0 0.13
G3EA
W3EA
2-11
1.12MAX.
28.4MAX.
M3
+0.02
1.12-0
+0.5
28.45-0
+0
R3.0-3.0
+0
R0.12-0.12
G3EA
SUGGESTED MOUNTING CUTOUT
UNIT: ^INCH
mm