B60PF-1A Datasheet, PDF (1/1 Pages) DIOTEC Electronics Corporation – 60 AMP PRESS FIT HIGH VOLTAGE DIODES

DIOTEC ELECTRONICS CORP
18020 Hobart Blvd., Unit B
Gardena, CA 90248 U.S.A
Tel.: [phone] Fax: [phone]
Data Sheet No. B60PF-1A
60 AMP PRESS FIT HIGH VOLTAGE DIODES
FEATURES
VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM
MECHANICAL STRENGTH AND HEAT DISSIPATION
(Solder Voids: Typical < 2%, Max. < 5% of Die Area)
MECHANICAL SPECIFICATION
0.050 +_ 0.002“
PRESS FIT INTO HEAT SINK TO FURTHER ENHANCE
HEAT HANDLING CAPABILITY
1.32”
1.26”
PROPRIETARY HIGH TEMPERATURE JUNCTION
PASSIVATION FOR SUPERIOR RELIABILITY AND
PERFORMANCE
0.194”
0.184”
0.401”
0.385”
LOW THERMAL STRESS STRUCTURE - PASS
5 CYCLE (-55^OC TO +150^OC) THERMAL SHOCK TEST
0.505”/502”
OVER KNURL
0.173”
0.157”
0.039”
0.031”
MECHANICAL DATA
HEX DIE
Case: Nickel plated copper
Finish: All external surfaces are corrosion resistant
and the contact areas are readily weldable or
solderable
Maximum Soldering Temperature: 250 ^oC, 0.25" from case
for 10 Seconds
Mounting Position: Any. Maximum force used for diode
insertion to be 12 KN
Polarity: Color coded epoxy ring- ANODE on LEAD (Beige Ring):
Part No.=B6002PFA/B6004PFA. CATHODE on LEAD (Black Ring)
Part No.=B6002PFC/B6004PFC. Part No. marked on cap base.
DT
B6004A
0452
0.216" Flat to Flat
ALL DIMENSIONS IN INCHES
70^o Typ.
0.007”
0.005”
78 Places
Equally
Spaced
RoHS ^COMPLIANT
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified.
PARAMETER (TEST CONDITIONS)
SYMBOL
Series Number
Maximum Recurrent Peak Reverse Voltage
Working Peak Reverse Voltage
Maximum DC Blocking Voltage
Non-Repetitive Peak Reverse Voltage (Half Wave, 60 Hz, Single Phase)
Average Forward Rectified Current
Non-repetitive Peak Forward Surge Current
(Half wave, single phase, 60 Hz sine applied to rated load)
Forward VoltageDrop @ 60Amp DC (Typical)
Maximum DC Reverse Current at Rated Blocking Voltage Tc = 25 ^OC)
Junction Operating & Storage Temperature Range
VRRM
VRWM
VDC
VRSM
IO
IFSM
VF
IR
TJ,TSTG
RATINGS
B6002PFA
B6002PFC
B6004PFA
B6004PFC
200
400
240
60
720
<1.05
<2.0
-65 to +215
480
60
720
<1.05
<2.0
-65 to +215
UNITS
VOLTS
AMPS
VOLTS
mA
°C
2.05 b60pf