50DBP Datasheet, PDF (1/2 Pages) DIOTEC Electronics Corporation – 50 AMP SILICON BRIDGE RECTIFIERS

DIOTEC ELECTRONICS CORP.
18020 Hobart Blvd., Unit B
Gardena, CA 90248 U.S.A
Tel.: [phone] Fax: [phone]
Data Sheet No. BRDB-5000P-1B
ADBD-5000P-1B
50 AMP SILICON BRIDGE RECTIFIERS
FEATURES
VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM
MECHANICAL STRENGTH AND HEAT DISSIPATION
(Solder Voids: Typical < 2%, Max. < 10% of Die Area)
MECHANICAL SPECIFICATION
SERIES: DB5000P - DB5010P and ADB5004P - ADB5008P
Heat Sink
BUILT-IN STRESS RELIEF MECHANISM FOR
SUPERIOR RELIABILITY AND PERFORMANCE
BH
Heat Sink
BH
INTEGRALLY MOLDED HEAT SINK PROVIDES VERY
LOW THERMAL RESISTANCE FOR MAXIMUM HEAT
DISSIPATION
UL RECOGNIZED - FILE #E124962
MBoolddeyd
LT
D1
HOLE FOR
#10 SCREW
(Nom. Hole Dia.=0.208")
LL
MBoolddeyd
HOLE FOR
#10 SCREW
(Nom. Hole Dia.=0.208")
LD
RoHS COMPLIANT
+
D1
AC
AC
)+
D3 ^BL
)+
_
AC
BL D1
_
+
AC ^D2
MECHANICAL DATA
Case: Case: Molded epoxy with integral heat sink
Epoxy carries a U/L Flammability rating of 94V-0
Terminals: Round silver plated copper pins or fast-on terminals
Soldering: Per MIL-STD 202 Method 208 guaranteed
Polarity: Marked on side of case
D2
BL
SYM
BL
BH
D1
MILLIMETERS INCHES
MIN
28.4
9.6
15.7
MAX
28.7
10.2
16.7
MIN
1.12
0.38
0.62
MAX
1.13
0.40
0.66
D1
BL
SYM
BL
BH
D1
MILLIMETERS INCHES
MIN
28.4
9.6
17.5
MAX
28.7
10.2
18.5
MIN
1.12
0.38
0.69
MAX
1.13
0.40
0.73
Mounting Position: Any. Through hole for #10 screw.
Max. mounting torque = 20 in-lb.
Weight: Fast-on Terminals - 0.7 Ounces (20.0 Grams)
Wire Leads - 0.55 Ounces (16.0 Grams)
D2 17.5 18.5 0.69 0.73
D3 13.5 14.5 0.53 0.57
LT
n/a 15.2 n/a 0.6
Suffix "T" indicates FAST-ON TERMINALS
D2 10.9 11.9 0.43 0.47
LL 20.6 n/a 0.81 n/a
LD 1.0 1.1 0.039 0.042
Suffix "W" indicates WIRE LEADS
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%.
PARAMETER (TEST CONDITIONS)
Series Number
Maximum DC Blocking Voltage
Working Peak Reverse Voltage
Maximum Peak Recurrent Reverse Voltage
SYMBOL _CONTROLLED
AVALANCHE
RATINGS
NON-CONTROLLED
AVALANCHE
UNITS
ADB ADB ADB DB
DB DB
DB
DB
DB DB
5004P 5006P 5008P 5000P 5001P 5002P 5004P 5006P 5008P 5010P
VRM
VRWM
VRRM
400 600 800 50 100 200 400 600 800 1000
VOLTS
RMS Reverse Voltage
VR (RMS) 280 420 560 35 70 140 280 420 560 700
Mimimum Avalanche Voltage
V(BR) Min
See Note 1
n/a
Maximum Avalanche Voltage
Forward Voltage Drop (Per Diode) at 25 Amps DC
Peak Forward Surge Current. Single 60Hz Half-Sine Wave
Superimposed on Rated Load (JEDEC Method). TJ = 125^O C
Average Forward Rectified Current @ TC = 75^o C
Max.
Typ.
V(BR) Max
VFM
IFSM
IO
See Note 1
n/a
1.10
1.02
600
50
VOLTS
AMPS
Junction Temperature Range
Storage Temperature Range
Maximum Reverse Current at Rated VRM
@ TA = 25^o C
@TA = 125^o C
Minimum Insulation Breakdown Voltage (Circuit to Case)
Typical Thermal Resistance, Junction to Case
TJ
TSTG
IRM
VISO
RGJC
-55 to +150
-55 to +150
1
50
2500
1.10
°C
mA
VOLTS
o_C/W
Notes: (1) These Bridges Exhibit The Avalanche Characteristic at Breakdown. If Your Application Requires a Specific Breakdown Voltage Range, Please Contact Us.
3.01 50bdp
E51