English
Language : 

PSH2 Datasheet, PDF (5/5 Pages) DDK Ltd. – Compact Coaxial Connector
↓X
PSH2 Series
○ Instruction Manual
When mating the connector, please Pinuslle-orfft tThoeolconnector along the center conductor.
When unmating the connector, please pull off vertically by using below tool
(No.357J-K8035-01).
②Pull off vertically
  Excessive torsional mating cause⇒s to①bInesebrrtoken.
Pull-off Tool
(357J-K8035-01)
Unit:mm
② Pull off vertically
⇒ ① Insert
↑2N(Max.)
・Allowable cable load at mating
 Do not add the load more than right figure.
→4N(Max.)
↑X
↓2N(Max.)
→2N
↓X
○ Reflow Temperature Profile
260
230
200
150
100
50
MAX:260℃
Pre-heating
150~200℃
60~120sec
Pull-off Tool
(357J-K8035-01)
230℃ max.② Pull off vertically
30~35sec
⇒ ① Insert
Time[sec]
※ Above reflow temperature plofile can be fluctuated by sort of the solder paste. Please test the
soldering temperature beforehand.
※ The temperature is measured at the terminal area.
※ Reflow cycle is up to twice.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
 Moreover, the characteristic and the specification of the published product are the reference values.
 Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
5