CM10-SP10S-S-D Datasheet, PDF (3/5 Pages) DDK Ltd. – One-Touch Locking Style Small Sized Circular Connectors

CM10 Series
○ 2-Contact Plug
・Contact Style : Socket
・Termination：Solder or Crimp
・The contact is sold separately.
Straight Plug
(51.4)
Right Angle Plug
Unit：mm
１
２
１
２
１
２
(51.4)
(32.5)
　Straight Plug P/N Right Angle Plug P/N Cable Outside Dia.
CM10-SP2S-S-D
CM10-AP2S-S-D
φ 4.0 〜φ 6.0
CM10-SP2S-M-D
CM10-AP2S-M-D１
φ 6.0 〜φ 9.0
CM10-SP2S-L-D
CM10-AP2S-L-D^２
φ 9.0 〜φ 11.6
A3
Note: The applicable cable outside diameter is in the case of cabtyre cable.
Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue.
CM10-D
CM10-xP2S-D
(32.5)
○ Contact of 2-Contact Plug
A3
Loose Piece Contact
Item
Crimping Type
Soldering Type
Contact P/N
( 100 pcs in 1 bag )
CM10-#22SC(C3)(D8)-100
CM10-#22SC(S2)(D8)-100
御参考図
Applicable Wire
Conductor Size Insulation Dia.
16 〜 20AWG
φ 1.87 〜φ 2.45
16AWG Max.
φ 3.00 Max.
Hand Tool P/N
357J-50448T
Extraction Tool P/N
357J-50548T
1. The packaging specification is 100 pcs of contacts per bag for sale.
２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to
the cable or crimping the contacts with the cable.
Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only)
The semi-automatic crimping machine is required
when you terminate the reel contacts.
　 Contact P/N
( 4,000 pcs on 1 reel )
CM10-#22SC(C3)(D8)-4000
Applicable Wire
Conductor Size Insulation Dia.
16 〜 20AWG
φ 1.87 〜φ 2.45
Semi-Automatic Crimping Machine
1set P/N
Applicator　P/N
AP-A50541T
AP-A50541T-1
Extraction Tool P/N
357J-50548T
1. Due to the construction of CM10-#22SC(C3)(D8)-4000 you can only make the crimping process by AP50541T.
So the process of striping cable shall be made in advance.
2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper).
CM10-#22SC(C3)(D8)- □□□□
CM10-#22SC(S2)(D8)- □□□□
15.6
6
15.6
6
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
　 Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
数量 符号
図番
部品名称
材質
処理・他
承認
設計 形式
品名
（＃２２ソケットコンタクト）
江嶋 ^機番
'08. 4. 7 一般 寸法
角度
CM10-#22SC(C3)(D8)-4000
検図
製写 公差 ±0.1 ±30′図番
改版
5
処理・他
品名
（＃２２ソケットコンタクト）