CM02-8D2TA5-CF Datasheet, PDF (2/6 Pages) DDK Ltd. – DeviceNet Micro-Style Connectors

MATERIAL/FINISH
3P)4
$$PPNNQQMMJJBBOOUU
Item
Insulator
Contact
Coupling Ring
Backshell Nut
Contact Holder
Backshell
Clamp Nut
O-Ring
Gasket
Bushing
Plug (With Socket Contacts)
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Nickel Plating
Aluminum Alloy/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Jack (With Pin Contacts)
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Aluminum Alloy/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Resistor (With Pin or Socket Contacts)
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Aluminum Alloy/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Synthetic Rubber/Black
Synthetic Rubber/Black for Socket
Item
“T”Tap
Insulator
Plastic(UL94V-0)/Black
Contact
Copper Alloy/Gold Plating
Coupling Ring
Zinc Alloy/Nickel Plating
Shell
Nut Washer
Gasket(Mating Side) Synthetic Rubber/Black
Gasket(Mounting Side)
Overmolding Resin
Plastic(UL94V-0)/Black
Receptacle
(With Pin Contacts)
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Copper Alloy/Nickel Plating
Copper Alloy/Nickel Plating
Synthetic Rubber/Black
Plug Receptacle
(With Socket Contacts)
Plastic(UL94V-0)/Black
Copper Alloy/Gold Plating
Zinc Alloy/Nickel Plating
Copper Alloy/Nickel Plating
Synthetic Rubber/Black
Synthetic Rubber/Black
CRIMP TOOL
・For DeviceNet Plug and Jack
Highly reliable crimp termination can be made for
the straight plug and the straight jack. Two kinds
of crimp tools are needed since a connector has a
straight contact and angle contacts of which style
are different. However the locater can be removed
and you can use one hand tool for termination if
you have two locators each for the straight contact
and the angle contacts.
Item
Conductor Size
AWG 22 - AWG 24 AWG 18 - AWG 20
A set of crimp tool for straight contacts 357J-19811
357J-17917
Hand Tool
357J-12610
357J-12610
Contents
Locator
357J-18918
357J-18918
Inspection Gauge 2
357J-19779-2
357J-17900-2
A set of crimp tool for angle contacts 357J-19812
357J-17898
Hand Tool
357J-12610
357J-12610
Contents
Locator
Inspection Gauge 1
357J-17899
357J-19779-1
357J-17899
357J-17900-1
Inspection Gauge 2
357J-19779-2
357J-17900-2
・For CC-Link Plug and Jack
The connectors for CC-Link network will have four
(4) angle contacts and the style of contact is only
one. It is feasible for you to terminate the cable to
the contacts by one kind of the crimp tool for angle
contacts.
Item
A set of crimp tool for angle contacts
Hand Tool
Contents
Locator
Inspection Gauge 2
Conductor Size
AWG 18-AWG 20
357J-21598
357J-12610
357J-17899
357J-17900-2
◆ CONFIGURATION OF CONTACTS
Straight Pin Contact
Angle Pin Contact
Straight Socket Contact
Angle Socket Contact




◎ Specifications and/or dimensions in this catalog are subject to change without notice.
　Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2