PSC2 Datasheet, PDF (1/2 Pages) DDK Ltd. – SMB Style Connector

SMB Style Connector ^{(Low Cost Version)}
PSC2 Series
Connector
Type
SMB
Freguency
Range
DC 〜 4GHz
Characteristic
Impedance
50 Ω
Applicable
Cable
1.5D
Lock Type
Push On
PSC
PSC2
OUTLINE
PSC2 series is intermateable with SMB style
connector which conform to MIL-PRF-39012 and
modified smaller and lighter.
It is achieved low cost by reducing the number of
parts and using molding parts/press-fabricated parts.
APPLICATIONS
Base station, Telecom, Measurement
equipments.
FEATURE
1. Added the spring which prevent the interface form spreading.
It improves the strength for the torsional mating and retaining force.
2. Recommended cable：1.5DS-QEHV(TA)　（Shikoku Cable）and 1.5D-HQ･SUPER　（Fujikura）
3. RoHS Compliant
4. Mating height is 9mm (max.). (Mating connector is PSC-SR-PS-D2)
SPECIFICATIONS
Characteristic Impedance
Rated Volatge
　50 Ω
335VAC(r.m.s.)
Dielectric Withstanding Voltage 1000V AC(r.m.s.) / 1 minute
Insulation Resistance
1000M Ω Mim. at 500V DC
Contact Resistance
6m Ω Max.
V.S.W.R.
1.3 max. at DC to 4GHz
Mating Height
9.0mm max.
Operating Temperature
-40 〜 +85℃
＊ The specifications are typical but may not apply to all connectors. Please check 　
the specifications on each item with its drawing from us when you use.
MATERIAL/FINISH
RoHS
CCoommpplliiaanntt
Item
Material / Finish
Contact
Copper Alloy / Au Plating
Outer Conductor Copper Alloy / Ni or Au Plating
Insulator
Fluorine Resin
V.S.W.R.
PSC2-LP-1.5D-CR3 (L=250mm, Double-ended Harness）
　
1.5
　 ＤC～4GHz VSWR
1.4
1.3
1.2
1.1
1.0 _{0　　　　　　1.0　　　　　 2.0　　　　　 3.0　　　　　 4.0}
Frequency【GHz】
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without a previous notice.
　Moreover, the characteristic and the specification of the published product are the reference values.
151216 ^{　Please confirm the content with the latest delivery specifications when you use the product.}
http://www.ddknet.co.jp