EBSP1303MXG-D Datasheet, PDF (1/6 Pages) DDK Ltd. – Moistureproof Circular Connectors for Solder Terminations Meeting IP55

Moistureproof Circular Connectors
for Solder Terminations Meeting IP55
EB Series
Wa t e r p r o o f
IP55
Lock Type
Bayonet
OUTLINE
EB series is a moistureproof circular connector to
meet Class IP55 protection when mated. The rubber
inserts prevent moisture and dust from intruding into a
system. EB series has a bayonet coupling design which
is suitable for applications requiring quick positive
coupling and vibration resistance.
FEATURE
1. Bayonet Coupling
　This series has a bayonet coupling design. The click sound after rotating the coupling ring gives you the indication of full 　　
　coupling.
2. 5 Keys to Prevent Mismating
　The shell has five keys. Alternate insert positions eliminate the connector mismating if more than one connector with the same
　size and arrangement is to be used in a system. The insulator is permanently positioned in the shell so that only a connector 　
　with the same degree of rotation can be mated with it.
3. Quick and Easy Termination
　The contacts are preloaded in the connector. The solder cups are oriented in one direction to simplify termination.
SPECIFICATIONS
Contact Size
#20 Contact
#16 Contact
Male Contact Diameter
1.0mm
1.6mm
Rated Voltage
250V AC(r.m.s.) or 350V DC
Rated Current
5A ／ Contact
10A ／ Contact
Applicable
Cable
Conductor Diameter
Nominal Sectional Area
Reference Wire Size
1.0mm max.
0.5mm² max.
AWG #20 max.
1.5mm max.
1.25mm² max.
AWG #16 max.
Operating Temperature
－ 25℃～＋ 85℃
Insulation Resistance
1,000M Ω (min.) at 500V DC.
Dielectric Withstanding Voltage
1,000V AC(r.m.s.) at 1 minute.
Contact Resistance
　 5m Ω max. at 1A DC
Vibration
Amplitude : 10-55Hz / 1.5mm
Waterproof Rating
IP55
Shock
Acceleration 50G.
Durability
500 cycles
Humidity(Stable Condition)
40℃、90-95% , 96 hours
Heat Cycle
－ 40℃ to +100℃：5 cycles
Salt Spray
5% , 35℃ , 48 hours
Note: AWG wire sizes for reference only.
MATERIAL / FINISH
RoHS
CCoommpplliiaanntt
Item
Insert
Contact
Shell
Hood
Boot
Protection Cap
Material / Finish
Polychloroprene Rubber / Black
Copper Alloy / Silver Plating (Standard) or Gold Plating (Option)
Zinc Diecast / Zinc Plating, Trivalent Chromium Treatment(Black)
Aluminum Alloy / Zinc Plating, Trivalent Chromium Treatment(Black)
Polychloroprene Rubber / Black
Polychloroprene Rubber / Black, Zinc Plating, Trivalent Chromium Treatment
◎ Specifications and/or dimensions in this catalog are subject to change without notice. ◎ Your checking the latest specifications with our drawings would be highly appreciated.
121105
http://www.ddknet.co.jp