17HE Datasheet, PDF (1/8 Pages) DDK Ltd. – MIL-C-24308-Compatible High-Density Crimp Type

17HE Series
RoHS Compliant
MIL-C-24308-Compatible High-Density Crimp Type
FEATURE
●High-density D-sub connector compatible to MIL-C-24308. It is called “high-density” because 9-con-
tacts shell contains 15 contacts.
●Receptacles (socket contact) come in three types : conventional “L-shaped DIP type” , and space-sav-
ing “L-shaped DIP type” and “SMT type” .
●The space-saving types are lower by 2mm in mounting height than the conventional type, and best suited
to high-density mounting because the area (front and back) they occupy on PCB is smaller by 50% or 70%
in the case of L-shaped DIP- or SMT-type, respectively, than conventional ones.
● Plug (pin contact) consists of crimp-type press-contacts, and is compatible with three types of cables
(AWG 30, 28 and 26) and existing 17JE type hood.
SPECIFICATION
Voltage Rating
Current Rating
Dielectric Withstanding Voltage
Insulation Resistance
Contact Resistance
Wire Accommodation
250V AC (r.m.s.)
1A/Contact
1,000V AC (r.m.s.)/for 1 minute
5,000MΩ min. at 500V DC
20mΩ max.
AWG30, 28, 26, 24
InsulatorJacket Diam.φ0.8 to φ1.21
MATERIAL/FINISH
P/N
Block
Shell
Contact
Hood
MATERIAL/FINISH
PBT resin/(UL94V-0)/color black
PPS resin/(UL94V-0)/color black
Brass/Nickel Plating
Copper alloy/Mating area : Gold over Nickel Plating,
Tail area : Sn-Ag over Nickel Plating
ABS resin/Nickel Plating
Cautions about Use
Use connector on a panel fixed on PCB by fastening it on the panel with small screws or engaging block
Ｌ
17HE
●　1 ●