DFPMU-DP Datasheet, PDF (4/6 Pages) Digital Core Design – Floating Point Coprocessor Double Precision

formation about the data classes are passed
as result to appropriate internal module.
Shifter – performs mantissa shifting during
normalization, denormalization operations.
Information about shifted-out bits are stored
for rounding process.
Control Unit – manages execution of all
instructions and internal operation required to
execute particular function.
Interface – makes interface between exter-
nal device and DFPMU-DP internal 32-bit
modules. It contains data, control and status
registers. It can be configured to work with 8-,
16- and 32-bit processors.
PERFORMANCE
The following table gives a survey about
the Core area and performance in the AL-
TERA® devices after Place & Route (all key
features have been included):
Device
Speed
grade
Logic Cells
F_max
CYCLONE
-6
7070
77 MHz
CYCLONE-II
-6
7080
68 MHz
STRATIX
-5
7070
82 MHz
STRATIX-II
-3
5290
109 MHz
Core performance in ALTERA® devices
DFPMU-DP floating point instructions per-
formance has been compared to standard C
library functions delivered with every com-
mercial C compiler. Each program was exe-
cuted in the same system environments.
Number of clock periods were measured be-
tween input data loading into work registers
and output result storing after operation.
The results are placed in table below. Im-
provement has been computed as number of:
(NIOS-II CLK) divided by (NIOS-II+DFPMU-
DP CLK), required to execute particular in-
struction.
IEEE-754 FP Instruction
Addition
Subtraction
Multiplication
Division
Square Root
Sine
Cosine
Tangent
Arcs Tangent
Average speed improvement:
Improvement
12.0
11.7
10.6
15.0
21.5
52.0
60.8
97.9
78.7
38.3
More details are available in core docu-
mentation.
The following table gives a survey about
the 32-bit NIOS-II+DFPMU-DP performance
compared to 32-bit NIOS-II.
Device
NIOS-II
NIOS-II+DFPMU (arithmetic)
NIOS-II+DFPMU (trigonometric)
NIOS-II+DFPMU (overall)
Improvement
1.0
14.1
72.4
38.8
All trademarks mentioned in this document
are trademarks of their respective owners.
http://www.DigitalCoreDesign.com
http://www.dcd.pl
Copyright 1999-2007 DCD – Digital Core Design. All Rights Reserved.