DSPI Datasheet, PDF (1/6 Pages) Digital Core Design – Serial Peripheral Interface - Master/Slave

DSPI
Serial Peripheral Interface – Master/Slave
ver 2.07
OVERVIEW
The DSPI is a fully configurable SPI mas-
ter/slave device, which allows user to config-
ure polarity and phase of serial clock signal
SCK.
The DSPI allows the microcontroller to
communicate with serial peripheral devices. It
is also capable of interprocessor communica-
tions in a multi-master system. A serial clock
line (SCK) synchronizes shifting and sampling
of the information on the two independent se-
rial data lines. DSPI data are simultaneously
transmitted and received.
The DSPI is a technology independent de-
sign that can be implemented in a variety of
process technologies.
The DSPI system is flexible enough to in-
terface directly with numerous standard prod-
uct peripherals from several manufacturers.
The system can be configured as a master or
a slave device. Data rates as high as CLK/4.
Clock control logic allows a selection of clock
polarity and a choice of two fundamentally
different clocking protocols to accommodate
most available synchronous serial peripheral
devices. When the SPI is configured as a
master, software selects one of eight different
bit rates for the serial clock.
The DSPI automatically drive selected by
SSCR (Slave Select Control Register) slave
select outputs (SS7O – SS0O), and address
SPI slave device to exchange serially shifted
data. Error-detection logic is included to sup-
port interprocessor communications. A write-
collision detector indicates when an attempt is
made to write data to the serial shift register
while a transfer is in progress. A multiple-
master mode-fault detector automatically dis-
ables DSPI output drivers if more than one
SPI devices simultaneously attempts to be-
come bus master.
DSPI is fully customizable, which means it
is delivered in the exact configuration to meet
users’ requirements. There is no need to pay
extra for not used features and wasted silicon.
It includes fully automated testbench with
complete set of tests allowing easy package
validation at each stage of SoC design flow.
APPLICATIONS
● Embedded microprocessor boards
● Consumer and professional audio/video
● Home and automotive radio
● Digital multimeters
KEY FEATURES
● SPI Master
○ Master and Multi-master operations
○ 8 SPI slave select lines
○ System error detection
○ Mode fault error
○ Write collision error
○ Interrupt generation
○ Supports speeds up ¼ of system clock
All trademarks mentioned in this document
are trademarks of their respective owners.
http://www.DigitalCoreDesign.com
http://www.dcd.pl
Copyright 1999-2007 DCD – Digital Core Design. All Rights Reserved.