UF2A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT ULTRAFAST RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 2.0 Amperes)

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
UF2A
THRU
UF2K
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT ULTRA FAST RECTIFIER
VOLTAGE RANGE - 50 to 800 Volts
CURRENT - 2.0 Amperes
FEATURES
* ldeal for surface mounted applications
* Low leakage current
* Glass passivated junction
SMB ( DO-214AA)
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
*Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: As marked
* Mounting position: Any
* Weight: 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
UF2A
50
35
50
UF2B
100
70
100
UF2D
200
140
200
UF2G
400
280
400
2.0
60
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
Maximum Reverse Recovery Time (Note 3)
Typical Thermal Resistance (Note 2)
VF
IR
trr
RθJL
1.0
50
1.4
10
200
20
Typical Junction Capacitance (Note 1)
CJ
30
Operating and Storage Temperature Range
TJ,TSTG
-65 to + 175
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal Resistance (Junction to Ambient), 0.2x0.2in² (5X5mm²) copper pads to each terminal.
3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
UF2J
600
420
600
UF2K
800
560
800
UNITS
Volts
Volts
Volts
Amps
1.7
100
Amps
Volts
uAmps
nSec
0_{C/ W}
pF
0_C
328
NENXNETXETXT BBAACBCKAKCK EEXXITEITXI