SMF5.0A Datasheet, PDF (1/3 Pages) UN Semiconducctor INC – Surface Mount Transient Voltage Suppressors (TVS)

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
SMF5.0A
THRU
SMF200A
TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE RANGE - 5.0 to 220Volts PEAK PULAE POWER - 200 Watts
FEATURES
* Glass passivated junction
* 200 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low inductance
* Fast response time
SOD-123FL
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 0.017 gram
.039(1.0)
.024(0.6)
.154(3.9)
.138(3.5)
.114(2.9)
.098(2.5)
.008(0.2)
.004(0.1)
.075(1.9)
.063(1.6)
.047(1.2)
.031(0.8)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.043(1.1)
.020(0.5)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. SMF5.0C, SMF220CA).
Electrical characteristics apply in both directions
Peak Pulse Power Dissipation on 10/1000 µs waveform
(Note1,FIG.1)
Steady State Power Dissipation at TA = 25^OC
Lead Lengths .375"(9.5mm) (Note 2)
SYMBOL
PPPM
PM(AV)
VALUE
200
1.0
Peak Forward Surge Current, 8.3ms single half sine-wave
IFSM
superimposed on rated load(JEDEC Method) (Note 3)
Operating and Storage Temperature Range
TJ , TSTG
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^OC per Fig. 2.
2. Mounted on Copper Leaf area of 0.2 X 0.2"( 5.0 X 5.0mm ) per Fig. 5
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
20
-55 to + 150
UNITS
Watts
Watts
Amps
O_C
REV-1,DEC,2015
1
www.dccomponents.com