SMBJ50 Datasheet, PDF (1/4 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
SMBJ5.0
THRU
SMBJ170CA
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE RANGE - 5.0 to 170 Volts
PEAK PULSE POWER - 600 Watts
FEATURES
* Ideal for surface mounted applications
* Glass passivated junction
* 400 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: Indicated by cathode band except Bidirectional types.
* Mounting position: Any
* Weight: 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
SMB (DO-214AA)
.083(2.11)
.075(1.91)
.185(4.70)
.160(4.06)
.060(1.52)
.030(0.76)
.220(5.59)
.200(5.08)
.008(.203)
.002(.051)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. SMBJ5.0C, SMBJ170CA)
Electrical characteristics apply in both directions
Peak Pulse Power Dissipation on 10/1000 µs waveform (Note1)
Steady State Power Dissipation (Note 2)
Peak Forward Surge Current 8.3mS single half sine-wave
superimposed on rated load (JEDEC Method) (Note 3)
Operating and Storage Temperature Range
SYMBOL
PPPM
PM(AV)
IFSM
TJ, TSTG
VALUE
Minimum 600
5.0
100
-55 to + 150
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^oC per Fig.2.
2. Mounted on 0.2 X 0.2" ( 5.0 X 5.0mm ) copper pad to each terminal.
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
Watts
Watts
Amps
0_C
352
NENXNETXETXT BBAACBCKAKCK EEXXITEITXI