SD520S Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 5 Ampere)

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
SD520S
THRU
SD5100S
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODE
VOLTAGE RANGE - 20 to 100 Volts
CURRENT - 5.0 Amperes
FEATURES
* Metal to silicon rectifier majority carrier conduction
* Low power loss, High efficiency
* High current capability
* Low forward voltage drop
* High surge capacity
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Mounting position: Any
* Weight: 0.4 grams Approx.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TO-252(DPAK)
.268(6.8)
.252(6.4)
.217(5.5)
.205(5.2)
2
.063(1.6)
.055(1.4)
.077(2.0)
.065(1.7)
.022(0.6)
.018(0.5)
1
.035
(0.9)
Max
.032
(0.8)
Max
.228(5.8)
.213(5.4)
23
.110(2.8)
.087(2.2)
.091 _Typ
(2.3)
.059(1.5)
.035(0.9)
.024(0.6)
.018(0.5)
no suffix
3
2
"Y" suffixed
1
3
2
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC=75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
SYMBOL SD520S
VRRM
20
VRMS
14
VDC
20
SD530S
30
21
30
SD540S
40
28
40
SD550S
50
35
50
SD560S
60
42
60
SD580S SD5100S
80
100
56
70
80
100
UNITS
Volts
Volts
Volts
IO
5.0
Amps
IFSM
100
Amps
Maximum Instantaneous Forward Voltage at 5.0A DC
Maximum DC Reverse Current at
Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
Typical Thermal Resistance (Note1)
Typical Junction Capacitance (Note 2)
Storage Operating Temperature Range
VF
IR
RθJA
CJ
TJ, TSTG
0.55
0.75
2.0
50
80
550
-55 to + 125
0.85
Volts
mAmps
0_{C/ W}
pF
0_C
Note : 1. Mounted on PC Board with 14mm²(0.013mm thick) copper pad areas.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.