SD1020D Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODE VOLTAGE RANGE - 20 to 100 Volts

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
SD1020D
THRU
SD10100D
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER DIODE
VOLTAGE RANGE - 20 to 100 Volts
CURRENT - 10 Amperes
FEATURES
* Metal to silicon rectifier majority carrier conduction
* Low power loss, High efficiency
* High current capability
* Low forward voltage drop
* High surge capacity
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Mounting position: Any
* Weight: 1.7 grams Approx.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TO-263(D²PAK)
.405(10.3)
.380(9.7)
2
.190(4.8)
.055
(1.4)
Max
.160(4.1)
6^o~8^o
.055(1.4)
.045(1.2)
.370(9.4)
.330(8.4)
123
.625(15.9)
.575(14.6)
.070(1.8)
.050(1.3)
.100
(2.5)
Typ
.055(1.4)
.045(1.2)
.039(1.0)
.020(0.5)
6^o~8^o
.110(2.8)
.090(2.3)
.029(0.7)
.018(0.5)
0^o~5^o
1
2
3
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC=100^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
SYMBOL SD1020D SD1030D SD1040D SD1050D SD1060D SD1080D SD10100D UNITS
VRRM
20
30
40
50
60
80
100 Volts
VRMS
14
21
28
35
42
56
70 Volts
VDC
20
30
40
50
60
80
100 Volts
IO
10
Amps
IFSM
150
Amps
Maximum Instantaneous Forward Voltage at 5.0A DC
Maximum DC Reverse Current at
Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
Typical Thermal Resistance (Note1)
Typical Junction Capacitance (Note 2)
Storage Operating Temperature Range
VF
IR
RθJA
CJ
TJ, TSTG
0.65
0.75
5.0
100
80
700
-55 to + 150
0.85
Volts
mAmps
0_{C/ W}
pF
0_C
Note : 1. Mounted on PC Board with 14mm²(0.013mm thick) copper pad areas.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.