S1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
S1A
THRU
S1M
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 1.0 Ampere
FEATURES
* ldeal for surface mounted applications
* Low leakage current
* Glass passivated junction
SMB ( DO-214AA )
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
*Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: As marked
* Mounting position: Any
* Weight: 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.083(2.11)
.075(1.91)
.185(4.70)
.160(4.06)
.060(1.52)
.030(0.76)
.220(5.59)
.200(5.08)
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
SYMBOL
VRRM
VRMS
S1A S1B S1D S1G S1J
50 100 200 400 600
35
70
140 280 420
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
VDC
50 100 200 400 600
IO
1.0
IFSM
30
Maximum Instantaneous Forward Voltage at 1.0A DC
VF
1.1
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
IR
5.0
100
Maximum Reverse Recovery Time (Note 3)
trr
2.5
Typical Thermaesistance (Note 2)
RθJL
12
Typical Junction Capacitance (Note 1)
CJ
30
Operating and Storage Temperature Range
TJ,TSTG
-65 to + 175
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal Resistance (Junction to Ambient), 0.2x0.2in² (5X5mm² ) copper pads to each terminal.
3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
S1K S1M UNITS
800 1000 Volts
560 700 Volts
800 1000 Volts
Amps
Amps
Volts
uAmps
uSec
0_{C/ W}
pF
0_C
342
NENXNETXETXT BBAACBCKAKCK EEXXITEITXI