RS1AG Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
RS1AG
THRU
RS1MG
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 1.0 Ampere
FEATURES
* ldeal for surface mounted applications
* Low leakage current
* Glass passivated junction
SMA ( DO-214AC )
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
*Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
* Polarity: As marked
* Mounting position: Any
* Weight: 0.064 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.062(1.60)
.055(1.40)
.181(4.60)
.157(4.00)
.114(2.90)
.098(2.50)
.096(2.44)
.078(2.00)
.060(1.52)
.030(.76)
.208(5.28)
.188(4.80)
.008(0.203)
.002(0.051)
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
RS1AG RS1BG RS1DG RS1GG RS1JG RS1KG RS1MG UNITS
50
100
200
400
600
800 1000 Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TA = 55^oC
VDC
50
100
200
400
600
800 1000 Volts
IO
1.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
30
Amps
Maximum Forward Voltage at 1.0A DC
Maximum DC Reverse Current at
Rated DC Blocking Voltage
Maximum Reverse Recovery Time (Note 3)
Maximum Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
@TA = 25^oC
@TA = 125^oC
VF
IR
trr
RθJL
CJ
TJ, TSTG
1.3
5.0
150
150
250
30
15
-65 to + 175
Volts
uAmps
500
nSec
0_{C/ W}
pF
0_C
NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC
2. Thermal Resistance (Junction to Ambient), .24in² (6.0mm² ) copper pads to each terminal.
3. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A