RB151 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes)

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
RB151
THRU
RB157
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 1.5 Amperes
FEATURES
* Surge overload ratings to 50 Amperes peak
* Good for printed circuit board assembly
RB-15
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: As marked
* Mounting position: Any
* Weight: 1.04 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SPACING
Dimensions in inches and (millimeters)
SYMBOL RB151 RB152 RB153 RB154 RB155 RB156
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
Maximum DC Blocking Voltage
Maximum Average Forward Output Current at TA = 25^oC
VDC
50
100
200
400
600
800
IO
1.5
Peak Forward Surge Current 8.3 ms single half sine-wave
IFSM
50
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage Drop per element at 1.0A DC
VF
1.0
Maximum DC Reverse Current at Rated
DC Blocking Voltage per element
I²t Rating for Fusing (t<8.3ms)
Typical Junction Capacitance ( Note1)
Typical Thermal Resistance (Note 2)
Operating Temperature Range
@TA = 25^oC
@TA = 100^oC
IR
I²t
CJ
RθJ A
TJ
10
500
10
25
40
-55 to + 125
Storage Temperature Range
T STG
-55 to + 150
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.47 x 0.47" (12x12mm) copper pads.
RB157 UNITS
1000 Volts
700 Volts
1000 Volts
Amps
Amps
Volts
uAmps
A²Sec
pF
0_C/W
0_C
0_C
188
NEXT
B_NA_EC_XK_T EX_BAIT_CK