MMSZ5221BS Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SILICON ZENER DIODES

DC COMPONENTS CO., LTD. ^MMSZ5221BS
THRU
R
RECTIFIER SPECIALISTS
MMSZ5259BS
TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON ZENER DIODES
FEATURES
* Planar Die construction
* Zener Voltages from 2.4V - 39V
* 500mW Power Dissipation
* Ideally Suited for Automated Assembly Processes
SOD-323
MECHANICAL DATA
* Case: Molded Plastic
* Terminals:Solder plated, solderable per
MIL-STD-202, Method 208
* Polarity: See Diagram Below
* Mounting position: Any
* Weight: 0.008 gram Approx.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.014(0.4)
.008(0.2)
.110(2.8)
.090(2.3)
.071(1.8)
.063(1.6)
.054(1.4)
.043(1.1)
.007(0.18)
.003(0.08)
.004
(0.10)
MAX.
.047(1.2)
.031(0.8)
Dimensions in inches(millimeters)
SYMBOL
VALUE
Zener Current see Table "Characteristics"
Power Dissipation (Notes 1) at Tamb=25^oC
Ptot
500
Peak Forward Surge Current, 8.3ms single half sine-wave
IFSM
4.0
superimposed on rated load (JEDEC Method) (Notes 2)
Maximum Forward Voltage at IF=100mA
VF
1.2
Operating and Storage Temperature
TJ,Tstg
-55 to + 150
Notes: 1. Mounted on 5.0mm² (.013mm thick) land areas.
2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
mW
Amps
Volts
o_C