GBK25A Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
GBK25A
THRU
GBK25M
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER
VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 25 Amperes
FEATURES
* Ideal for printed circuit board
* Surge overload rating: 260 Amperes peak
* Glass passivated junction
GBK
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Terminals: MIL-STD-202E, Method 208 guaranteed
* Polarity: Symbols molded or marked on body
* Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
HOLE FOR
NO. 6 SCREW
1.193(30.3)
1.169(29.7)
.189(4.8)
.173(4.4)
.150(3.8)
.134(3.4)
.134(3.4)
.122(3.1)
.106(2.7)
.096(2.3)
.094(2.4)
.078(2.0)
.043(1.1)
.035(0.9)
.114(2.9)
.098(2.5)
.031(0.8)
.023(0.6)
.402(10.2) .303(7.7) .303(7.7)
.386(9.8) .287(7.3) .287(7.3) ^SPACING
Dimensions in inches and (millimeters)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current @Tc=100^oC
(with heatsink Note 2)
(without heatsink)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum Forward Voltage Drop per element at 4.0A DC
Maximum DC Reverse Current at Rated
@TJ = 25^oC
DC Blocking Voltage per element
@TJ = 125^oC
I²t Rating for Fusing (t<8.3ms)
Typical Junction Capacitance ( Note1)
Typical Thermal Resistance (Note 2)
Operating Temperature Range
Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
I (AV)
GBK25A GBK25B GBK25D GBK25G GBK25J GBK25K GBK25M UNITS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800 1000 Volts
25
4.2
Amps
IFSM
350
Amps
VF
IR
I²t
CJ
RqJ A
TJ
TSTG
1.1
10
500
510
85
0.6
-55 to +150
-55 to +150
Volts
mAmps
A²Sec
pF
0_C/W
0_C
0_C
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to Case per element Unit mounted on 100x100x1.6mm Cu plate heat-sink.